Skip to Content

 

top rope solo with grigri reddit. {rstring1}

Top rope solo with grigri reddit. Neither the grigris nor the neox will slip if already locked with a climber hanging on the load strand. Backup can be a second rope, knots, a second device, etc. If rope has chance of abrading over edges you can setup intermediate anchor below that feature using a clove hitch to a draw before that feature with rope above loose/will be unweighed untill unclipping the clove. I also don't waste time teaching people to belay on an ATC. Use your best judgement. The grigri2 I’ve had for 10 years now is still working fine. It should auto-feed through without catching as you climb, but will catch a fall. A regular grigri slips under the weight of the rope when belaying someone from above. the ascension ''glides'' really smoothly on the rope as you climb. Honnold tr solos with a grigri often. Rap to the bottom of the climb and probably slightly weight one end of the Anchor the other end of the rope to the ground/your first available anchor, and run the rope backwards through the GriGri (basically attach your GriGri upside down, the ground anchor is the climber side, YOU are the belayer side). it was a pain in the ass to take in slack as i climbed so i switched to butterfly knots on a strand instead of the ropeman (while waiting to buy a micro trax hehe) If I am understanding you correctly, you build a regular top rope anchor, then belay yourself up with a grigri. After much reading, watching videos and practicing at home, I had my first rope solo session today. If I get stuck on the route and need to jug up, I can switch to my grigri, then use the lift ascender above it to make a quick pulley system for pulling myself up the rope 3:1 I'll be at Devil's Lake which, if my research is correct, has many top rope accessible climbs. Gri gri or gri gri + will work but will require you to manually pull rope through every once in a while. Jun 18, 2023 · The BD Gridlock carabiner (in the magnetron version, which is no longer made) is what Brent Barghan uses with an unmodified 3rd generation grigri, as described in his thoughtful blog post on lead rope soloing. Also like the Grigri 2 better than the new Grigri model…. Barghan in the same post also describes a clever way to manage the cache loops, which I use. Anchor that end of the rope to a good anchor. In my opinion, it would be better to rig your grigri to a fixed line and use backup knots as you climb. It works, but it's still annoying to pull slack through the grigri, especially if there aren't good stances every few feet. I'm currently looking for a single rope, microtrax+something setup that auto-feeds, which will prevent the cluster that two ropes and a grigri create. For the backup slip-knot, if you are worried that it might come undone, you can also clip a carabiner through the s Instead of a grigri, I use a Camp Lift ascender for my second. i never used a grigri while tr-solo so i can't tell, but i can say that my combo was an ascension and ropeman on separate strand and the ropeman didn't glide well. Use a strong locking carabiner to connect the Grigri to your climbing harness belay loop. Here’s how I top-rope solo with a GriGri. I have the normal gear for sport climbing, including a GriGri, and wanted to throw a potential TR solo setup idea out there: Set up an anchor and fix both strands of the rope. For top rope solo I used a M Whenever I read threads about top rope solo, everyone agrees on using one device to self-belay, and some kind of backup in case your belay device malfunctions. Trad climber. Bought a new Grigri and it wiggled and made a lot of noise and had to tape it. But one thing that I think I would do differently is from the top to clean, I would rappel with an ATC & third-hand instead of lowering off the grigri. Jul 17, 2017 - 11:59pm PT The alternatives to a grigri are a bit cheaper (although not much, compare 80 micro traction to the 100 grigri) The only downside is you need to pull slack through the grigri as you climb. To me this seems like an inefficient system because you have to pull twice as much rope through the grigri. And I had a blast! After some consideration I went for a grigri with chest harness (to keep it oriented right) as a main device and a Petzl ASAP as backup for the lead solos. chainsaw. Going to use a standard grigri on my belay loop and a Petzl shunt as a backup on my leg loop (but also pas’d up to my main harness loops). The physicality is identical (for top rope belaying. The uspise, you can use the grigri to descend without changing devices. ) Thanks for sharing this, I just got a couple of micro-traxions to top-rope-solo with, will definitely give lead-rope-soloing a go now too. The setup I mentioned allows you to climb freely without having to mess with the rope. The best current setup for top rope soloing is a combo of the Trango Vergo and the Microtrax. You can use the grigri to belay if you do a lot of sport climbing. Google it to find pictures of how to orient the devices. CA. Jul 17, 2017 · Anyone using a grigri for solo top-rope is insane. Un-tie the knots as you go. I am considering the following setup, for climbing single pitch crags of 8-15 meters on top rope (either tree anchors or bolted anchors): 60 meter static (aka semi-dynamic) rope, double figure-8 to the anchor Petxl micro traxion with prusikk backup. Thread the rope throught the Grigri so the rope connected to the anchor exits on "To climber" side of Grigri. Neither the grigris nor the neox work without a hand on the brake, from above (though the grigri+ in top rope mode does, actually,) The Grigri is a more versatile device. I've been using the same setup Aaron mentions. . If you can belay on a Grigri, you can belay on an ATC. Hi climbers, I’m planning on top rope soloing a 50m single pitch, anchor at the top, throw my 70m rope down, rap, and then climb back up. Top rope, lead, multi pitch, rope ascension, single-line raps; the device does a lot. Falls closer to anchor with any slack in the system will be more jarring etc than any top rope or lead fall. I figure by the time it wears out completely the ropes will be thinner by then and I’ll need a newer grigri anyway. Needs weight similar to a microtrax, but once you’re off the ground it’s great. But if you're doing normal top rope climbing, your belayer has a belay device, and that's it, no backup.